In Stock
Techtop NEMA Motors JEP.754FP

Techtop NEMA Motors JEP.754FP

$350.00

Techtop NEMA Motors JEP.754FP

0.75 HP, 1800 RPM, 3 Phase, 575V, 56J Rigid/C-Flange, TEFC NEMA Premium

Status1 in stock
Categories
FacebookXPinterestRedditDeliciousLinkedinWhatsappEmail

Techtop NEMA Motors JEP.754FP

0.75 HP, 1800 RPM, 3 Phase, 575V, 56J Rigid/C-Flange, TEFC NEMA Premium

Additional information

Weight 20 lbs
Dimensions 12 × 6 × 7 in

Motor Features

STANDARD FEATURES

  • Removable feet F1, F2, F0 field convertible
  • 1.25 Service Factor with 60Hz operation / 1.0 Service Factor with 50Hz operation
  • 36 Month warranty
  • Conduit Box is 90º rotatable
  • Cast aluminum construction with cast aluminum c-flanges
  • Class I, Division II, Groups A, B, C and D compliant
  • Anti-microbial (tropicalization) on stator winding
  • Compact lightweight design
  • Dual oversized shielded bearings
  • AISI 304 grade stainless steel threaded shaft
  • Surface finish:
    • Alkyd enamel RAL7024 – Graphite Gray
    • Black oxide surface treatment for increased corrosion resistance
  • Stainless steel nameplate
  • Corrosion resistant hardware

OPERATING PARAMETERS

  • Continuous (S1) duty
  • Ambient temperatures up to 40ºC
  • Installation up to 1000 MASL (3300 ft.)

CONNECTION

  • 9-Lead 230V parallel-wye / 460V series-wye connection
  • 3-Lead 575V wye connection

INGRESS PROTECTIONThe standard degree of enclosure protection is IP55 (increased IP protection is available). Both drive end and non-drive end are fitted with double lip oil seals, including a rubber shaft slinger on the drive end. Terminal box is double gasketed. DE and NDE end bell fitted with sintered brass one-way drain.

INSULATION AND INVERTER RATING

  • Class F Insulation (Impregnation resin, magnet wire and insulation materials are Class H)
  • Designed to Class B temperature rise
  • Vacuum Impregnated
  • Inverter Rated 15:1 Constant Torque, 30:1 Variable Torque (1.0 S.F. on VFD Power)
  • Exceeds NEMA MG 1 Part 31.4.4.2

Specifications

ELECTRICAL DATA
Rated Motor Output Power
0.75
HP
–
kW
Rated Motor Speed
1750
r/min 60Hz
–
r/min 50Hz
Rated Motor Voltage (+/-10%)
575
V/60Hz
–
V/50Hz
Rated Motor Current
0.99
A (In) @ 60Hz
–
A (In) @ 50Hz
Phase
3
Ø
Locked Rotor Current @ High Voltage
6.92
A (In) @ 60Hz
Fl Current @ 208V
–
A (In) @ 60Hz
Service Factor
1.25
@ 60Hz
–
@ 50Hz
KVA Code
L
60Hz
–
50Hz
Nominal Efficiency
81.5
% @ 60Hz
Nominal Power Factor
0.68
cosφ @ 60Hz
Leads (Qty, Size)
3
18
Connection
Y
−
Coil Resistance
–
Ω
Start Capacitor
–
μF/V
Run Capacitor
–
μF/V
VFD DUTY (S.F. 1.0)
RATIO
Hz
Variable Torque
30:1
2 – 60
Constant Torque
15:1
4 – 60
FULL LOAD TEMPERATURE RISE
Full Load Temperature Rise
29.7
ºC @ 60Hz
–
ºC @ 50Hz

 

GENERAL DATA
Frame Size
56J
Enclosure
TEFC
Mounting
Rigid/C-Flange
Approximate Weight (lbs.)
20.2 lbs.
Casing Material / Fan Cover
Cast Aluminum
Steel
Shaft Material
304 SS
NEMA Design
B
Degree of Protection (IP)
55
Insulation Class / Temp Rise (60Hz)
F
B
Tropicalization
YES
Duty
Cont. / S1
Conduit Box Location
F1
Feet Removable / Double Drilled
YES
NO
Paintwork
7024
Graphite Gray
MECHANICAL DATA
Bearing DE Side
6204 2RS
Bearing ODE Side
6204 2RS
Grease Type
Mobil Polyrex EM
Compensation Ring (wavy washer)
NDE
Moment of Inertia (lb-ft2)
–
Sound Pressure @ 3 FT dBA
–
SITE CONDITIONS
Ambient Temperature (℃)
40
Meters Above Sea Level (MASL)
1000
HAZARDOUS LOCATIONS
CSA Certified
CSA Certified
Temperature Code
T4
–

Downloads

Performance Data

Drawings & Wiring

Data Package

User Manual

PLEASE NOTE THAT PAYMENTS TERMS ARE DUE UPON RECEIPT UNLESS OTHERWISE STATED. THERE IS A 25% RESTOCKING CHARGE ON RETURNED ITEMS UNUSED WITHIN 30 DAYS. NO RETURNS ON SPECIAL/CUSTOM ORDERS INCLUDING NEW PUMP BUILDS, HEAT EXCHANGERS, CUSTOM PUMP ORDERS, MANUFACTURED ITEMS. **NOTE: CLEARANCE ITEMS ARE SOLD AS IS, NEW IN BOX. NO WARRANTY AND NO RETURNS ON ALL CLEARANCE ITEMS.

Related products

"" has been added to your cart.View cart