Techtop NEMA Motors JMA0024FP

$539.39

Techtop NEMA Motors JMA0024FP

2 HP, 1800 RPM, 3 Phase, 575V, 145JM Rigid/C-Flange, TEFC NEMA Premium

Need Help?
Call For Assistance: (604) 590-4414

Status1 in stock

CategoriesBell & Gossett

Techtop NEMA Motors JMA0024FP

2 HP, 1800 RPM, 3 Phase, 575V, 145JM Rigid/C-Flange, TEFC NEMA Premium

Additional information

Weight	40 lbs
Dimensions	16 × 9 × 7 in

Motor Features

STANDARD FEATURES

Removable feet F1, F2, F0 field convertible up to and including 326T frame, F2 convertible 364T and larger
1.25 Service Factor with 60Hz operation / 1.0 Service Factor with 50Hz operation
36 Month warranty
Conduit Box is 90º rotatable
CSA Certified for Class I, Division II, Groups A, B, C and D / Class I, Zone 2, Groups IIC, IIB, IIA
IEEE 45 Marine Duty 254JM/JP frame and larger
Anti-microbial (tropicalization) on stator winding
Cast iron fan covers on 254JM/JP frame and larger
Regreasable bearings 254JM/JP frame and larger
Mobil Polyrex EM polyurea grease
AISI 304 grade stainless steel shaft
Surface finish:
- Alkyd enamel RAL7024 – Graphite Gray
- Black oxide surface treatment for increased corrosion resistance (aluminum models only)
Stainless steel nameplate
Corrosion resistant hardware
Ultra high strength, reusable lifting straps included with motors 254JM/JP frame and larger

OPERATING PARAMETERS

Continuous (S1) duty
Ambient temperatures up to 40ºC
Installation up to 1000 MASL (3300 ft.)

CONNECTION

Up to and including 215JM/JP Frame:
9-Lead 230V parallel-wye / 460V series-wye connection
3-Lead 575V wye connection
254JM/JP Frame and larger:
12-Lead 230V parallel-delta / 460V delta connection
6-Lead 575V single voltage delta connection

INGRESS PROTECTIONThe standard degree of enclosure protection is IP55 (increased IP protection is available). Both drive end and non-drive end are fitted with double lip oil seals, including a rubber shaft slinger on the drive end. Terminal box is double gasketed including nipple seals between conduit box and stator body. DE and NDE end bell fitted with sintered brass one-way drain.

INSULATION AND INVERTER RATING

Class F Insulation
Designed to Class B temperature rise
Vacuum Impregnated
Inverter Rated 15:1 Constant Torque, 1000:1 Variable Torque (1.0 S.F. on VFD Power)
Exceeds NEMA MG 1 Part 31.4.4.2

Specifications

ELECTRICAL DATA

Rated Motor Output Power

–

Rated Motor Speed

1740

r/min 60Hz

–

r/min 50Hz

Rated Motor Voltage (+/-10%)

575

V/60Hz

–

V/50Hz

Rated Motor Current

2.23

A (I_n) @ 60Hz

–

A (I_n) @ 50Hz

Phase

Locked Rotor Current @ High Voltage

16.58

A (I_n) @ 60Hz

Fl Current @ 208V

–

A (I_n) @ 60Hz

Service Factor

1.25

@ 60Hz

–

@ 50Hz

KVA Code

60Hz

–

50Hz

Nominal Efficiency

86.5

% @ 60Hz

Nominal Power Factor

0.78

cosφ @ 60Hz

Leads (Qty, Size)

Connection

−

Coil Resistance

–

Start Capacitor

–

μF/V

Run Capacitor

–

μF/V

VFD DUTY (S.F. 1.0)

RATIO

Variable Torque

1000:1

2 – 60

Constant Torque

15:1

4 – 60

FULL LOAD TEMPERATURE RISE

Full Load Temperature Rise

ºC @ 60Hz

–

ºC @ 50Hz

GENERAL DATA

Frame Size

145JM

Enclosure

TEFC

Mounting

Rigid/C-Flange

Approximate Weight (lbs.)

39.5 lbs.

Casing Material / Fan Cover

Cast Aluminum

Steel

Shaft Material

304 SS

NEMA Design

Degree of Protection (IP)

Insulation Class / Temp Rise (60Hz)

Tropicalization

YES

Duty

Cont. / S1

Conduit Box Location

Feet Removable / Double Drilled

YES

Paintwork

7024

Graphite Gray

MECHANICAL DATA

Bearing DE Side

6206 2RS

Bearing ODE Side

6205 2RS

Grease Type

Mobil Polyrex EM

Compensation Ring (wavy washer)

NDE

Moment of Inertia (lb-ft2)

–

Sound Pressure @ 3 FT dBA

62.2

SITE CONDITIONS

Ambient Temperature (℃)

Meters Above Sea Level (MASL)

1000

HAZARDOUS LOCATIONS

CSA Certified

Temperature Code

T2D

–

Downloads

PLEASE NOTE THAT PAYMENTS TERMS ARE DUE UPON RECEIPT UNLESS OTHERWISE STATED. THERE IS A 25% RESTOCKING CHARGE ON RETURNED ITEMS UNUSED WITHIN 30 DAYS. NO RETURNS ON SPECIAL/CUSTOM ORDERS INCLUDING NEW PUMP BUILDS, HEAT EXCHANGERS, CUSTOM PUMP ORDERS, MANUFACTURED ITEMS. **NOTE: CLEARANCE ITEMS ARE SOLD AS IS, NEW IN BOX. NO WARRANTY AND NO RETURNS ON ALL CLEARANCE ITEMS.